Cut the soap base into squares. Once done, add to your microwave-safe bowl and heat for 30 seconds. Stir and repeat the process until melted. Add in the oil. Separate the mixture into three different bowls.

Add in up to 2 drops of your coloring, a different one in each bowl.

Add in the glitter and mix.

Use rubbing alcohol and spray the mold. Once done pour the soap into the mold. It should fill enough to cover the cavities. Spray the top with more rubbing alcohol. Let it harden for 1 hour.

If you want to see if the soap is ready, blow on it. If there are ripples, it's not ready.

Spray the teal layer with the rubbing alcohol as this helps the layers stick together a bit better. Pout in the blue, stopping about halfway from the top of the very first layer. Then you want to spray that with rubbing alcohol. Let harden for 2 hours.

Spray the blue with rubbing alcohol then pour on the purple soap. Spray with rubbing alcohol and allow 24 hours before trying to remove.

When you're ready to take out, pop them out and put them in an airtight container.